Toytec Boss Aluma Series 2.5 Performance Suspension System (10+ GX460/03-09GX470) 2"-3" Lift
**$15 SHIPPING SPECIAL on BOSS Kits** *applies to CONUS only.
**Please note this item may ship from the manufacturer**
Email us at Sales@apexoverland.com if you need help with options
The Toytec Boss Aluma Series 2.5 Performance Suspension System kit is designed with performance in mind. Includes:
TTLK254R - Toytec Boss 2.5 Front Aluma Series IFP Coilovers
The shock bodies are made from hard anodized aluminum for cooler operation as well as better protection from the elements.
Coilovers are adjustable from 2-3" of lift
Internal hydraulic valving optimized to match the 700 lb rate spring for use with or without a bumper or winch.
Coilovers in this kit are assembled and ready to bolt on. No spring compressor or special tools needed for installation.
Shock bodies are 2.5" in diameter providing additional oil over standard OEM shocks.
The 25BOSS-GX460KP-ALM kit includes sway bar relocation brackets, preload adjustment tool and owners manual.
Nitrogen charged design with internal floating piston to help prevent shock fading and cavitation
Heavy duty 19mm induction-hardened piston shaft.
These shocks are fully rebuildable
Sway Bar Relocation Brackets - Included for proper coilover clearance on Non KDSS models.
Front Differential Drop kit - Recommended for all lifted 4x4s
Front Bump Stops:
DuroBumps are proudly made in the USA with dual durometer (hardness) rubber that provides smooth progressive dampening and greatly reduces hard bottom outs. This allows for more control and comfort compared to OEM bump stops that are harsh on contact. With DuroBumps installed, the shell-shock effect experienced when hitting the OEM bump stops is completely eliminated.
Rear Bump Stops:
DuroBumps - DuroBumps 4.25″ rear bump stops are intended for vehicles that have rear lifts of 2″. Its heavy-duty Dual Durometer Rubber provides smooth progressive dampening and greatly reduces hard bottom outs. With DuroBumps, gain better off road control and comfort vs the harsh-on-contact OEM bump stops and eliminate the shell-shock effect experienced on hitting those larger bumps.
Rear Lift Options:
Toytec Rear Superflex Coils: - Our BOSS kits comes standard with Toytec RCC2.0 rear springs- These springs offer 2" lift with stock rear weight with the best overall ride quality and rear articulation.
Optional HD Rear Superflex coils offer additional weight capacity. Recommended 150-200 lbs of constant load for 2-2.5" of lift.
FJBOSS25R-ALM - Toytec 2.5 Aluma Series IFP Rear Shocks.
Perfectly matched to pair with the Boss Aluma Series Coilovers
Tuned for maximum performance and comfort.
Gas-pressurized design with internal floating piston to help prevent cavitation and fading
The shock bodies are 2.5"(56mm) made from hard anodized aluminum for cooler operation as well as better protection from the elements.
FJBOSS25R-ALM are completely rebuildable, serviceable and tunable.
LKFJ20R-P - Toytec 2.0 Aluma Series IFP Rear Shocks
Similar to the 2.5 IFP Aluma shocks, but in a 2.0 Diameter.
Add Upper Control Arms to complete your kit (Recommended for use with Aluma Series Coilovers):
Total Chaos Uniball Upper Control arms - 96504 - Maximize your wheel travel and increase your strength while also correcting alignment angles.
SPC Adjustable Upper Control Arms - 25480 - The most adjustable UCA on the market. Correct your alignment angles. They are also great to help with adjusting for tire clearance.
OEM Wheels and Tires may require wheel spacers for proper fitment.
For Aftermarket Wheels, we recommend 8"-8.5" Wide Wheels with 4.5" to 4.75" backspacing.