2024+ Toyota Tacoma CPLT Intake

Unlock the Full Potential of Your Tacoma

Specifically engineered for the 2024+ Toyota Tacoma, the CPLT Intake System replaces restrictive factory components with a high-efficiency design that delivers real-world power gains — on the trail and on the street.

Maximum Airflow & Power

By utilizing an additional opening in the chassis fender area, the CPLT Intake provides your turbocharger with a direct path to fresh air. A larger airbox, high-flow dry filter, and precision-tuned smooth-bore intake tube work together so your engine breathes effortlessly.

• Up to 14 HP and 14 lb-ft of torque at the wheels in back-to-back dyno testing
• 12%–17% increase in airflow compared to OEM Standard and TRD models

Independent Dyno Comparison 

A community-run controlled dyno test compared the Factory airbox, Banks, SXTH Element, and K&N intakes on the same 2024 Tacoma 2.4T, same dyno, same fuel, and same test procedure — with an ECU learning reset between each intake.

Peak wheel horsepower results (stock calibration):

• SXTH Element: 244.58 whp
• Banks: 244.98 whp
• K&N: 243.86 whp
• OEM Airbox: 234.93 whp

All three aftermarket intakes outperformed the factory airbox by approximately 9–10 whp under controlled conditions. Notably, the SXTH Element intake also demonstrated the most stable fuel trim behavior of the aftermarket options — approximately 10–12% correction vs. 13–14% for Banks — meaning the ECU requires less compensation to maintain commanded fueling.

The tester's key conclusion: "These intake systems are all relatively comparable on the stock tune, but they have substantially more potential once paired with proper professional calibration."

Read the full independent dyno comparison on Tacoma4G →

Engineered for Protection — Backed by Data

Your engine is an investment that deserves the best possible protection, but you shouldn't have to sacrifice performance to get it. Our engineering team has compiled this data based on rigorous, data-driven filtration testing to show you exactly how our hardware performs in the real world.

Our dry media filters provide 99% efficiency for normal on-road daily driving and spirited light off-roading.

Modern engine air filters must balance two critical characteristics: airflow and filtration efficiency. Using ISO 5011 / SAE J726 laboratory testing standards, the SXTH Element filter demonstrated up to 99.52% filtration efficiency while maintaining low initial restriction at 300 m³/h airflow. Industry-standard ISO 5011 testing evaluates differential pressure, airflow restriction, and particulate capture under controlled laboratory conditions — allowing for direct comparison between filter designs.

Research and filtration industry data show that particles at or above approximately 1 micron are commonly associated with accelerated wear on the intake tract and engine components. Our filter is specifically engineered to capture particles within that critical range.

Innovation in Every Detail

Our patent-pending QuickSnap Lid uses powerful magnets to secure the airbox cover — no screws, no clips, no hardware vibrating loose. Inspect or swap your filter in seconds.

True Bolt-On Performance

The intake tube diameter is meticulously tuned to match factory MAF sensor specifications, ensuring optimal airflow with zero risk of check engine lights and no aftermarket tune required.

Features

• High-flow dry air filter for maximum airflow
• 12%–17% airflow increase over OEM Standard and TRD models
• QuickSnap magnetic lid for tool-free maintenance
• No tuning required — no check engine light risk
• Smoother intake tubing for increased HP and TQ
• Durable high-density polymer airbox construction

Intake Specs

• Vehicle: 2024+ Toyota Tacoma
• Airbox Material: High-density polymer
• Filter Type: High-flow dry air filter
• Tuning Required: None
• Average Gains: Up to 14 HP and 14 lb-ft TQ at the wheels